Dongguan Penglian Electronics Co., Ltd.
Main products:USB Cable,HDMI Cable,Network Cable,Serial Cable,AV cable
Products
Contact Us
  • Contact Person : Ms. yang Irene
  • Company Name : Dongguan Penglian Electronics Co., Ltd.
  • Tel : 400-114-26666
  • Fax : 0086-0769-38835091
  • Address : Guangdong,DongGuan,The1th Industrial Area,XianGangVillage,ChangAnTown,DongGuanCity,GuangDong province
  • Country/Region : China
  • Zip : 523872

RJ45 POE Cable

RJ45 POE Cable
Product Detailed
1pcs. POE Injector (RJ45 Male + DC in to RJ45 Female) 1pcs. POE Extractor (RJ45 Male + DC out to RJ45 Female) RJ45 POE Cable

Product specification:

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it's hard to get power to your Ethernet devices. Wouldn't it be convenient to use the same cable for power and data? Using these power over Ethernet adapters, you can do just that! Each cable has a female RJ45 on one side which is adapted to a male RJ45 and 5.5x2.1mm barrel jack connector on the other side. The 'injector' cable has a female barrel jack connector and the 'splitter' cable has a male barrel jack. Simply attach the cables at each end of your network cable, plug the male barrel jack from the splitter into your target device and plug your power adapter into the injector. Now you can use one cable to provide both power and data for your Ethernet enabled device.

Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.

Features:

Connector Barrel size is 2.1mm (5.5 x 2.1 mm)Power Pins 4,5 +  and 7,8 -

 

1. It is very simple to connect a passive PoE.  On the lower part, we connect the Ethernet

RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter

to the power socket.

2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.

3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connect

the power connectors and the Ethernet to the powered equipment. The equipment is now

connected by them.

 

 

About our factory:

We specialize in the manufacture of all kinds of USB adapters and other computer, phone data cables, such as DHMI adapters, travel adapters, SATA cables, audio cables, RJ45 cables, VGA cables, USB cables,1394 cables, AV cables, USB connectors, DB connectors, RCA jacks, hooks, etc. Our   POE Cable  as well as other products mainly sell to North America, European countries, Asia, Southeast Asia and other foreign countries. Our monthly production capacity of   POE Cable   is 1,000,000pcs, but this is not our utmost we can do. If the order is even larger, we can surely do more   POE Cable   than present. Our factory has also been certified as an ISO9001-2008 factory and all of our products must be done the 100% inspection to ensure no bad part flow to you.

IF you have any interest about or inquiry of  POE Cable   ,please contact me freely! We will quote you the latest competitive price within the first fastest time.

RJ45 POE Cable



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.